Alkyd Metal Primer

SURFACE PREPARATION
To ensure better adhesion, the surface must be dry, clean and free of dust, grease, residues, loose old paint, etc. In case of rusty surfaces, scrub and remove the residue.
On new metal surfaces: before coating, apply 1 coat of KRAFT RUST BLOCKER followed by 1-2 coats of KRAFT METAL PRIMER.
On wooden surfaces: before coating, apply 1 coat of KRAFT WOOD CARE for protection against insects and fungi, followed by 1-2 coats of KRAFT METAL PRIMER.
On walls, plasters: Rub and apply 1 – 2 coats of KRAFT METAL PRIMER. Then apply the top coat.
Allow new plaster or cement surfaces to dry completely for at least 30 days before applying the paint.

APPLICATION INSTRUCTIONS
“ Ready to use. If necessary, before you start painting, dilute the paint by adding 5-10% by volume of KRAFT PINE SOLVENT or up to 10% by volume of KRAFT NITRO 1100 for air gun application and mix well. For airless applications, dilute up to 5% by volume with KRAFT NITRO 1100.
“ Suitable painting tools are: brush, roller or air gun
“ Apply 1 – 2 coats of KRAFT METAL PRIMER for an ideal result. Then apply 2 coats of the final KRAFT product.
“ Apply only in an open or well-ventilated area.
“ Minimum repainting time 24 hours.
“ Surface drying in 2-3 hours at 25ºC and 50% relative humidity. The drying time is affected by the weather conditions.
“ Do not apply at temperatures below 5°C and above 35°C and above 65% relative humidity.

INSTRUCTIONS FOR POST-APPLICATION
“ Clean the tools immediately after use with KRAFT PENELO PENELO CLEANER and then with warm water and soap.
“ Close the container tightly to keep it in good condition for future use and store it before and after use in a cool place away from exposure to sunlight or frost.