Profi Cement paint

SURFACE PREPARATION
The surface must be dry, firm and clean of dust, other debris and loose old paint. Wet sanding is recommended for surface preparation.
“On new surfaces: Before applying the paint, apply a coat of water primer such as KRAFT ECO DUR AQUA or KRAFT DUR.
“On surfaces that need repair: use KRAFT SPACHTEL or KRAFT PUTTY or the appropriate KRAFT repair material.
“ Allow new plaster or cement surfaces to dry completely for at least 30 days before applying the paint.

APPLICATION INSTRUCTIONS
“ Avoid application in case of imminent rain in the next 7 days.
“ Before you start painting, dilute 5-10% by volume with tap water and stir well.
“ Suitable painting tools are: Brush, roller or airless gun.
“ Apply 2 coats of KRAFT PROFI CEMENT PAINT for an ideal result.
“ Minimum repainting time 4-5 hours.
” Surface drying in 1-2 hours at 25°C and 50% relative humidity. The drying time is affected by the weather conditions.
“ Do not apply at temperatures below 5°C and above 35°C and above 65% relative humidity.

INSTRUCTIONS FOR POST-APPLICATION
“ Clean tools immediately after use with warm water and soap.
“ Close the container tightly to keep it in good condition for future use and store it before and after use in a cool place away from exposure to sunlight or frost.