Solvent cement paint

SURFACE PREPARATION
Thesurface must be dry, clean and free from dust, other residues and loose old paint. In case of old rust, scrub the surface and remove the residue.
On new cementitious surfaces: apply one coat of KRAFT DUR. After 24 hours apply the top coat.
On painted / solid surfaces: apply two coats of KRAFT BETONYL.
Allow new plaster or cement surfaces to dry completely for at least 30 days before applying the paint.

APPLICATION INSTRUCTIONS
“ Before you start painting, dilute up to 5% by volume with K RAFT PINNELO SOLVENT.
“ Suitable painting tools are: Brush, roller or air gun.
“ Apply 1-2 coats of KRAFT BETONYL for an ideal result.
“ Apply only in an open or well-ventilated area.
“ Minimum repainting time 8 – 10 hours.
“ Surface drying in 1-2 hours at 25ºC and 50% relative humidity. The drying time is affected by the weather conditions.
“ Do not apply at temperatures below 5°C and above 35°C and above 65% relative humidity.

AFTER-USE INSTRUCTIONS
“ Close the container tightly to keep it in good condition for future use and store it before and after use in a cool place away from exposure to sun or frost.
“ Clean tools immediately after use with KRAFT PENELO PENELO CLEANER with warm water and soap.