STEP ACRYL (100% top quality acrylic cementitious paint)

SURFACE PREPARATION

– To ensure proper adhesion of the product, the surface to be painted must be cleaned of dust, grease, oil, peeled old paint, rust, mould or moisture residues.

– For new or porous surfaces, first apply the corresponding recommended primer of the product (Life dur, Life dur water)

– Apply the product in 2 coats (after mixing it well) which should be 1 – 2 hours apart.

– The product acquires all its mechanical strength after 20 – 30 days.

CONDITIONS OF APPLICATION

Avoid applying the product at temperatures below 6°C and above 40°C and when the relative humidity is higher than 80%. Adverse conditions during application can alter the final properties of the paint.

APPLICATION TOOLS

– Brush

– Roller blinds

– Paint gun

During work, keep the tools “wet” in the container or product container. Drain the tools thoroughly back into the box and clean them immediately with warm water and soap. If the product dries out, it can only be removed with strong detergents. Do not empty the washing liquids into the water table.