Custody

SURFACE PREPARATION
Thesurface must be dry, firm and clean of dust, other residues and loose old paint.
On new or painted surfaces: before applying the paint, apply one coat of KRAFT HAFT.
On surfaces that need repair: use KRAFT SPACHTEL or KRAFT PUTTY or the appropriate KRAFT repair material.
On mould-contaminated surfaces: Remove residues, apply KRAFT MOLD BLOCKER. After 24h remove the mould. Then apply one coat of KARFT HAFT.
Allow new plaster or cement surfaces to dry completely for at least 30 days before applying the paint.

INSTRUCTIONS FOR APPLICATION
“ Before you start painting, dilute 300 – 400% by volume with tap water and stir well.
“ Suitable painting tools are: Brush, roller or airless gun.
“ Stir well before use and during application.
“ Apply 1 coat of KRAFT HAFT for an ideal result. Then apply 2 coats of the final product.
“ Minimum repainting time 4 – 6 hours.
“ Do not apply at temperatures below 10°C and above 35°C and above 65% relative humidity.
“ Surface drying in 1-3 hours at 25°C and 50% relative humidity. The drying time is affected by the weather conditions.

AFTER-USE INSTRUCTIONS
“ Close the container tightly to keep it in good condition for future use and store it before and after use in a cool place away from exposure to sun or frost.
“ Clean tools immediately after use with soap and water.