Eco Dur Aqua water primer

SURFACE PREPARATION
The surface must be dry, firm and clean of dust, other debris and loose old paint. Wet sanding is recommended for surface preparation.
“On new surfaces: before applying the paint, apply one coat of KRAFT ECO DUR AQUA.
“On surfaces that need repair: use KRAFT SPACHTEL or KRAFT PUTTY or the appropriate KRAFT repair material.
“ Allow new plaster or cement surfaces to dry completely for at least 30 days before applying the paint.

APPLICATION INSTRUCTIONS
“ The product is not suitable for painted surfaces.
“ Minimize paint waste by calculating the amount of paint you will need.
“ Before you start painting, dilute 50-80% by volume with tap water and stir well. 50% dilution is intended for application on a roof.
“ Stir well before use and during application
” Painting tools: Brush, roller or airless gun
“ Apply 1 coat of KRAFT ECO DUR AQUA for an ideal result. Then apply 2 coats of the final product.
“ Minimum repainting time 4-6 hours.
“ Surface drying in 1-3 hours at 25°C and 50% relative humidity. The drying time is affected by the weather conditions.
“ Do not apply at temperatures below 10°C and above 35°C and above 65% relative humidity.

INSTRUCTIONS FOR POST-APPLICATION
“ Recover leftover paint to reuse.
“ Close the container tightly to keep it in good condition for future use and store it before and after use in a cool place away from exposure to sunlight or frost.
“ The reuse of paints can really minimise the environmental life-cycle impact of products.
“ Clean tools immediately after use with warm water and soap.