Payments by debit or credit card via PayPal
Master Hydrocontrol Force
8,50 € – 61,40 €
Description
High quality plastic paint for bathrooms and kitchens
High quality plastic paint. Certified as a low volatile compound emission product according to the most stringent specifications of the internationally recognized voluntary Indoor Air Comfort® label of Eurofins, contributing to indoor air quality and the healthy atmosphere of indoor spaces. Thanks to its isothermal property and the microscopic water globules it contains, it tends to balance the temperature of the walls and prevents the liquefaction of accumulated water vapour due to temperature differences. At the same time, it resists the growth of mould on its surface. It is evaluated by the internationally recognized microbiological institute IMSL.
Due to its dual property, it is ideal for homes with intense humidity where water vapor is created and in areas with insufficient ventilation or lack of natural lighting, such as bathrooms, WC, kitchens, basements, etc. It is easily washable and resistant to frequent washing and detergents. It has a mild odor. Due to its very low gloss, it covers all wall imperfections, offering an ultra matt finish.
” Wonderful ultra matte finish
” Resists mould growth
“Resistance to washing
SURFACE PREPARATION
The surface must be dry, firm and clean of dust, other debris and loose old paint. Wet sanding is recommended for surface preparation. Avoid creating dust and exposing yourself to it.
” On new surfaces: : Before applying the paint, apply 1 coat of water-based primer such as KRAFT ECO DUR AQUA or KRAFT DUR AQUA WHITE or KRAFT HAFT.
“On surfaces that need repair: use KRAFT SPACHTEL or KRAFT PUTTY or the appropriate KRAFT repair material.
“On surfaces with stain and/or mould problems: Clean the surface first with KRAFT MOLD BLOCKER and use KRAFT ECO STAIN BLOCKER AQUA as a substrate.
INSTRUCTIONS FOR APPLICATION
“Before you start painting dilute 5-10% by volume with tap water and stir well.
“Suitable painting tools are: Brush, roller or airless gun.
“The product must be coloured exclusively with the KRAFT INSPIRED COLOR colouring system on the recommended colouring base.
“For uniformity in shade and final finish, it is recommended to use containers from the same production batch. In case of different batches it is recommended to mix them in one large container.
“White is coloured with KRAFT MASTER BAS ICS for unlimited light shades.
“Apply 2-3 coats of KRAFT MASTER HYDROCONTROL for an ideal result.
“Minimum repainting time: 4-6 hours.
“Surface drying: 1-2 hours at 25°C and 50% relative humidity. The drying time is affected by the weather conditions.
“It is not recommended to apply the paint topically after the surface has been painted. There may be a difference in gloss or shade due to absorbency or application method. If necessary, total surface painting is recommended.
” Do not apply at temperatures below 5°C and above 35°C and above 65% relative humidity.
INSTRUCTIONS FOR POST-APPLICATION
“Clean tools immediately after use with warm water and soap.
“Close the container tightly to keep it in good condition for future use and store it in a cool place away from exposure to sunlight or frost.
“You can wash the surfaces gently with a soft sponge and water and in case of stubborn stains with a little detergent, after at least 15 days after painting. Due to the ultra matt finish, the gloss of the surface may increase after washing.
“ Store the product at a temperature of 5°C to 35°C.
Additional information
| Συσκευασία | 0,75lt, 10lt, 3lt |
|---|
Reviews
There are no reviews yet.