Decorative Wood Style Aqua

SURFACE PREPARATION
The surface must be dry, firm and clean of dust, other debris and loose old paint.
“On new surfaces: Before applying the varnish, precede the removal of oils and resins with KRAFT WOOD CARE, degrease along with the wood water, remove the dust with a damp lint-free cloth, treat the roses, apply 1 coat of KRAFT WOOD CARE preservative to protect against wood-eating insects and fungi. In case a coloured appearance is required on the wood, it is recommended that 1-2 coats of KRAFT WOOD SHIELD impregnation varnish be applied before the crust varnish.
“On already painted surfaces: Remove all old paint or varnish with KRAFT REMOVER and then clean the surface with KRAFT PURPLE SANDER, or thoroughly scrub until removed with suitable sandpaper. After the surface is completely dry and all debris has been removed, repair all defective areas of the wood with the appropriate putty.

APPLICATION INSTRUCTIONS
“Before you start painting, dilute up to 10% by volume with tap water and stir well.
“Ensure the moisture content of the wood does not exceed 10%.
” Do not apply to wooden surfaces in contact with soil or water.
“The strength of the material is reduced if it is applied to horizontal surfaces that are being pressed.
“A suitable painting tool is the brush.
“Apply 2 coats of KRAFT WOOD STYLE AQUA for an ideal result.
“Minimum repainting time 24 hours.
“Surface drying in ½-1 hour at 25°C and 50% relative humidity. The drying time is affected by the weather conditions.
” Do not apply at temperatures below 10°C and above 35°C and above 60% relative humidity.