Velvet Latex Plastic Color Ecological for Indoor Use Color Structure

Description

• To ensure proper adhesion of the product, the surface to be painted must be cleaned of dust, grease, oil, peeled old paint, rust, mould or moisture residues.
• For new or porous surfaces, first apply the corresponding recommended primer of the product (Step primer, Life dur water, Step plaster)
• Apply the product in 2 coats (after mixing it well) which should be 1 – 2 hours apart.
• The product acquires all its mechanical strength after 20 – 30 days.

Application conditions

Avoid applying the product at temperatures below 6°C and above 40°C and when the relative humidity is higher than 80%. Adverse conditions during application can alter the final properties of the paint.

Implementation tools

• Brush
• Clock
• Paint gun

Keep the tools “wet” in the container during work. Drain the product thoroughly from the tools and clean them immediately with warm water and soap. If the product dries, it only comes off with strong detergents. Do not empty the washing liquids into the water table.