Transparent primer Dur

SURFACE PREPARATION
Thesurface must be dry, clean and free from dust, grease, other residues, loose old paint etc.
On new surfaces: Wet scrubbing is recommended to prepare the surface. Before applying the paint, apply 1 coat of KRAFT DUR.
On surfaces that need repair: use KRAFT SPACHTEL, KRAFT PUTTY or the appropriate KRAFT repair material.
Allow new plaster or cement surfaces to dry completely for at least 30 days before applying the paint.

APPLICATION INSTRUCTIONS
“ The product is suitable for new surfaces, except for surfaces that have had adhesive, water-based paint or lime applied.
“ Before you start painting, dilute the product by adding 50 – 100% by volume of KRAFT PINE SOLVENT and mix well.
“ Dilution of 50% w/w is recommended for application on terraces.
“ Mix the material well before use and during application.
“Suitable painting tools are: Brush, roller or airless or air gun.
” Apply 1 coat of KRAFT DUR for an ideal result. For very absorbent surfaces, it is recommended to apply an additional layer. Then apply 2 coats of the KRAFT finish paint.
” Apply only in an open or well-ventilated area.
“Minimum repainting time 24 hours.
“Surface drying in 1-2 hours at 23ºC and relative humidity of 60%. The drying time is affected by the weather conditions.
” Do not apply at temperatures below 10°C and above 35°C and above 60% relative humidity.

INSTRUCTIONS FOR POST-APPLICATION
“ Clean the tools immediately after use with KRAFT PENELO PENELO CLEANER and then with warm water and soap.
“ Close the container tightly to keep it in good condition for future use and store it before and after use in a cool place away from exposure to sunlight or frost.